What Details Should Be Taken into Account When Installing Solar Powered Street Lights?

With the popularity of solar energy, solar powered street lights have also been widely used in our daily lives. When installing solar powered street lights, there is no need for complex wiring operations, only a cement base needs to be made and a battery pit needs to be made within 1 meter, and then it can be directly installed and fixed. In addition, what details should be paid attention to when installing solar powered street lights? Let's take a look together below!

Installation location of Solar Powered Street Lights

When installing solar powered street lights, at least ensure that the solar panel is above an open space without any obstructions, otherwise it will affect its photoelectric conversion efficiency. Avoid choosing places with backlight, and ensure that the solar panel can receive normal light and ensure the duration of light.

Secondly, although the installation of solar powered street lights does not require digging trenches and burying cables like ordinary street lights, a pit for making a cement base must still be excavated. Therefore, during installation, it is necessary to avoid areas where natural gas and other pipelines are buried to prevent accidents.

Foundation Part of Solar Powered Street Lights

The specific installation depth and width depend on parameters such as the height of the lamp pole. Grasp the size and other data strictly according to the construction drawings. In addition, pay attention to the local soil conditions. When installing solar powered street lights, also pay attention to keeping the pre-embedded parts, foundation, and original ground at the same horizontal level, which can better ensure the verticality of the lamp pole and the ground.

For example, if the soil quality of the installation site is soft, it needs to be buried deeper to ensure its stability. Also, consider the local climate conditions. If the local environment often experiences heavy winds and rains, firstly, choose a thicker design for the lamp pole, and secondly, the foundation depth needs to be deeper to avoid unsafe accidents such as the leaning of the lamp pole due to severe force, and also to ensure the quality of its own use.

Light Source and Solar Panel Part of Solar Powered Street Lights

For the solar panel part, first, be careful not to wear metal jewelry or the like when installing to avoid affecting the solar panel. The connection of the two involves the wiring, so anti-loosening and anti-leakage work should be done well, and the connection should be tight, and beauty should be considered, as well as the firmness of the screws, not too loose or too tight. Otherwise, the phenomenon of wire slipping will also have bad consequences.

In addition, the angle and orientation of the solar panel when installing should be based on the principle of accepting the maximum light conditions, which cannot be installed randomly, so as to maximize its effectiveness.

The above details about installing solar powered street lights are shared with you here. Solar street lights are a one-time investment that benefits for a lifetime.